Renesas Emulation Pod M30830T-EPB - Manual (Page 32)

( 30 / 72 )
Table 3.2 Switch settings of the M30830T-EPBM (1/2)
Signal Switch Setting Description
AVCC SW1
SW3 XOUT
Connects the AVCC pin of the MCU to the target
system.
Connects the AVCC pin of the MCU to the internal
power supply of the emulator.
Connects the AVSS pin of the MCU to the target
system.
Connects the X
OUT
pin of the MCU to the target
system.
Does not connect the X
OUT
pin.
Connects the AVSS pin of the MCU to the internal
GND of the emulator.
(Factory-setting)
AVSS SW2
AVCC VCC
AVCC VCC
(Factory-setting)
AVSS GND
AVSS GND
(Factory-setting)
XOUT OPEN
XOUT OPEN