Roland BR-864 - Manual (Page 107)

107
About the drum kits
Section 3
Copying drum sounds from other
drum kits
1. Press [TONE LOAD].
2. Press CURSOR [ ] [ ] to move the cursor to
“COPY,” and press [ENTER].
fig.03-519d
3. Turn the TIME/VALUE dial to specify the copy-
destination drum kit, then press [ENTER].
P1–9: Preset Drum Kit 1–9
S1–5: Song Drum Kit 1–5
fig.03-520d
4. Turn the TIME/VALUE dial to specify the copy-
destination drum sound, then press [ENTER].
* Select “ALL” if you want to copy all of the drum sounds in the
kit.
fig.03-521d
5. Turn the TIME/VALUE dial to specify the copy-
destination drum kit, then press [ENTER].
fig.03-522d
6. Turn the TIME/VALUE dial to select the copy-
destination song drum sound, then press [ENTER].
The load is executed.
To cancel, press [EXIT].
fig.03-522a
* During updating, “Keep power on!” appears in the upper line
of the display, while the lower line shows what is being
processed.
Once the copying is complete, the beginning screen for
Tone Load is returned to the display.
7. Press [TONE LOAD] (or [EXIT]) to return to the Play
screen.