Roland BR-864 - Manual (Page 131)

131
Section 4
Loop Effect Parameter Functions
Setting Procedure
1. Press [LOOP EFFECTS].
2. Press CURSOR [ ] [ ] to move the cursor to “CHO/
DLY” or “REV,” and press [ENTER].
fig.01-701d
3. Press CURSOR [ ] [ ] until “FX Type” or “Type” is
displayed, then turn the TIME/VALUE dial to select the
loop effect.
When using CHO/DLY
Select from “CHORUS,” “DELAY,” or “DBLN”
(doubling).
fig.01-702d
When using REV
Select either “HALL” or “ROOM.”
fig.01-703d
4. To change the settings for the selected effect, press
CURSOR [ ] [ ] to select the parameter and turn the
TIME/VALUE dial to change the set value.
fig.01-704d
5. When you finish making settings,
press [EXIT] repeatedly to return to the PLAY screen.