Ricoh Aficio AP2700 - Manual (Page 61)

Loading Paper and Other Media
43
4
❒ When you set thick paper in tray
2, do not stack paper above the
lower limit mark (
A) of tray 2.
Note
❒ Shuffle the paper before setting
in the tray.
❒ Load paper face up onto the
tray.
F
Align the side guide for the load-
ed paper size (
B) by opening the
release lever of the side guide
(
A).
G
Set paper guide lock to the
“locked” position.
H
Align the rear guide for the load-
ed paper size slightly by pushing
the releasing lever of the rear
guide.
I
Adjust the paper size dial for
loaded paper size.
Important
❒ Confirm that the setting of the
paper size dial matches the pa-
per size and feed direction of
the paper in the tray. Otherwise,
the paper misfeed or unexpect-
ed printing result might occur.
❒ Confirm that the paper size dial
matches the actual paper size
loaded in the tray. If the actual
paper size is not shown on the
dial, set the dial to "p" and
specify the paper size using the
operation panel. For more infor-
mation on specifying the paper
size, see P.27 “Paper Types and
Sizes”.
J
Slide the tray into the printer un-
til it stops.
ZAEY052E
ZAEY031E
ZAEY032E
ZAEY033E
ZAEY050E