Ricoh Aficio AP2700 - Manual (Page 99)

Replacing the Photo Conductor Unit
81
5
E
While pressing the green button,
slide the photo conductor unit out
until it stops.
F
Raise the green handle and slide
the photo conductor unit out to-
wards you.
Important
❒ Do not tilt or drop the removed
photo conductor unit. Moving
the unit abruptly can scatter
toner.
❒ While the photo conductor unit
is removed, do not change the
toner.
G
Take the new photo conductor
unit from the box and remove the
plastic bag, holding the handle.
Important
❒ Do not drop or change the re-
moved photo conductor unit.
❒ Do not touch the side of the
photo conductor unit.
H
Put the photo conductor unit re-
moved in step
F into the plastic
bag emptied in step
G, keeping
the unit at the same angle as when
it was installed. Then, zip the
plastic bag.
I
Remove the two red sheets from
the photo conductor unit in the
order shown in the illustration.
Important
❒ Remove the photo conductor
unit keeping the unit parallel to
the ground as shown in the il-
lustration. Otherwise, the toner
in the unit might scatter.
❒ Do not touch the inside of the
unit or the green parts, after the
black protection sheet is re-
moved.
J
Align the new photo conductor
unit onto the rail of the printer.
Slide the unit all the way into the
printer.
ZAEM330E
ZAEM340E
ቢ
ባ
ZAEM350E
ZAEM360E