Ricoh Aficio AP2700 - Manual (Page 64)

Paper and Other Media
46
4
B
Lift the paper guide lever.
Important
❒ If the paper guides do not
match the paper size, a skew
image or a paper misfeed might
occur.
Note
❒ Swing out the extender to sup-
port paper sizes longer than A4
short-edge feed (Metric version)
or 8
1 /
2
"
×
11" short-edge feed
(Inch version).
C
Load the paper and adjust the pa-
per guides to the sides of the pa-
per.
Important
❒ Confirm the print side of the
OHP transparencies. Some
OHP transparencies can be
printed on only the specific
side.
Note
❒ Do not stack paper over the lim-
it mark. Otherwise a skew im-
age or a paper misfeed might
occur.
❒ When you set custom size or
thick paper on the bypass tray,
do not stack paper above the
lower limit mark of the bypass
tray.
❒ Shuffle the paper before setting
in the tray.
❒ Load the paper face down onto
the tray.
D
Push down the paper guide lever.
Note
❒ If the paper guide lever is not
pushed down, paper misfeed
might occur.
E
Configure the paper size for the
loaded paper size.
Important
❒ The paper size specified with
the printer driver overrides the
one specified here.
Reference
For more information on speci-
fying the bypass tray, see the
printer driver help.
For more information on speci-
fying custom paper, see P.48
“Specifying the Custom Paper Size
for the Bypass Tray”.
ZAEY210E
ZAEY220E
ZAEY250E