Roberts Radio CRD-51 - Manual (Page 27)

If.you.need.any.further.advice,.please.call.our.Technical.Helpline.on.:-
020 8758 0338 (Mon-Fri)
Factory Reset
If your radio fails to operate correctly, or some digits on the display are
missing or incomplete, carry out the following procedure.
1. Press and hold down the Menu/Display button for 2 seconds,
2. Press the Tuning up or down buttons until “FACTORY” appears on
the display, press the Select button, the display shows “RESET” and
then press Select button again.
3. A full reset will be performed, the station list and presets will be erased.
The display will show “RESETING” followed by “ROBERTS” after few
seconds a station scan search will be performed automatically. The
display will show progress of the station search e.g. “>>>> 18”. The
number on the right of the display is the number of stations that have
been found.
1
2
2
3
26