More expressive (p. 28), Press the [3d] button or the [reverb] button – Roland HP-203 User Manual
Page 30
28
Performing
You can add liveliness to the sound to give it superb clarity and distinctness.
fig.Panel-Dynamics-e.eps
1.
Hold down the [3D] button and press the [Reverb] button.
The display will show the type of dynamics sound control.
fig.d-OFF.eps
2.
Use the [-] [+] buttons to select the desired sound control setting.
fig.d-1.eps
3.
Press the [3D] button or the [Reverb] button.
You will return to the normal screen.
You can use the Memory Backup function to store this setting in internal memory (p.
78).
For some sounds, this may cause distortion.
Dynamics Sound Control does not affect the sound from the Input jack or the sound of
external devices connected to the MIDI Out connector.
Adding Liveliness to the Sound (Dynamics Sound Control)
Indicate
Description
OFF
Dynamics sound control is turned off.
1 (Sharp)
Creates a sound with boosted bass and treble.
2 (Clear)
Produces a sound with chords in the low registers that are clear and distinct.
3 (Power)
Creates a sound with boosted bass.
NOTE
NOTE
HP203_e.book 28 ページ ２００６年１２月８日 金曜日 午前９時３３分