Ryobi P2601 - Manual (Page 5)

5
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL NAME EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
hrs Hours Time
Alternating Current Type of current
Direct Current Type or a characteristic of current
no
No Load Speed Rotational speed, at no load
Class II Construction Double-insulated construction
.../min Per Minute Revolutions, strokes, surface speed, orbits etc., per minute
Wet Conditions Alert Do not expose to rain or use in damp locations.
Safety Alert Symbol Precautions that involve your safety.
Read the Operator’s Manual
To reduce the risk of injury, user must read and understand
operator’s manual before using this product.
Eye Protection
Always wear safety goggles or safety glasses with side
shields and, as necessary, a full face shield when operating
this product.
Keep Bystanders Away Keep all bystanders at least 50 ft. away.
Gloves
Wear non-slip, heavy-duty protective gloves when handling
the blades.
Operate With Two Hands
Hold and operate the hedge trimmer properly with both
hands.
Moving Parts Keep hands away from moving parts.
Electric Shock
Failure to use in dry conditions and to observe safe practices
can result in electric shock.
Kickback DANGER! Beware of kickback.
Sharp Blade
Sharp cutting blades. To prevent serious injury, do not touch
cutting blades.