Radio Shack Auvio 16-923 - Manual (Page 17)

32
A
d
d
it
io
n
a
l
In
fo
33
A
d
d
iti
o
n
a
l I
n
fo
...................................................................................................................................................... BTSC
Video Processing .............................................................MPEG-2 video decoding (MP@ML, MP@HL)
........................................................................................................Decoding format: ATSC 18 formats
AV Input .............................................................................................................Composite Video Input
........................................................................................................................................LR Audio Input
TV AV Specifications ..................................... Video: Wide Fine color LCD Display (7”, 800*480 Digital)
........................................................................................................ Audio: Built-in Speaker, Earphones
Power ..............................................................................DC Adapter, Car Power Adapter (12~24VDC)
............................................................................................. Rechargeable Battery (Li-Poly, 2,000mAh)
.................................................................................................................... Smart power management
Specifications are typical; individual units might vary. Specifications are subject to change and
improvement without notice. Actual product may vary from the product images in this document.
Troubleshooting/FAQ
Problem Possible Solutions
Why won’t
the TV turn
on?
„
Check if the MAIN POWER switch on the back of TV is ON.
„
Make sure the power cord is plugged in to the wall outlet or
car power port securely.
„
Use another appliance to check that the outlet works.
„
If using a battery, try plugging in the AC adapter to charge it.
Why doesn’t
my remote
work?
„
Remove any obstruction from the TV’s sensor.
„
Use the remote control no more than 19 feet away from your TV.
„
If the TV sensor’s LED does not flash when a button is
pressed, replace the battery on the remote.
Why am I
getting poor
or no sound?
„
Make sure the MUTE function is off and the volume is turned up.
„
Choose another language on the HOT menu. The channel
might not broadcast in the currently selected language.
„
If using headphones, make sure they are properly connected.
Why am
I getting
intermittent
or no signal?
„
Make sure your antenna is connected and undamaged.
„
The antenna signal strength may be low. Check the signal
meter on the receiver to see if the signal is strong enough. If
not, adjust your antenna system.
„
If you are using a powered antenna, make sure the power
boost and amplifier gain are on. Try adjusting the gain setting.
„
Move your TV near a window if you are indoors.
„
Move your TV away from other appliances that could cause
interference (such as a microwave).
Why do I
have a blank
blue screen?
„
The TV is in External Input mode. Make sure your A/V cable
is connected properly and the device’s power is turned on.
„
Return to Digital or Analog TV mode. See pages 30 and 31.