Replacing the battery in your remote control, Using the antenna, Installing the battery in your remote control – Radio Shack Auvio 16-923 User Manual
Page 8
14
S
e
tu
p
15
S
e
tu
p
Using the Antenna
Fully extend the built-in antenna to help with signal reception.
To find the best signal reception, access the METER menu and check the
signal strength while rotating the antenna in various directions.
There might be no signal or a weak signal if:
Building or trees are blocking the transmitting tower.
It is snowing or raining heavily.
You are walking, running or moving with the TV.
You are operating the TV inside a moving vehicle.
The TV is surrounded by other electronics.
If the picture is not clear with the built-in antenna extended, try placing your TV
near a window, or connecting to an external antenna.
n
Note: Digital Mode requires the TV to be stationary. You cannot watch digital channels
in a moving vehicle.
Installing the Battery in Your Remote Control
1.
Press the tab on the battery compartment tray and slide the battery
compartment tray out.
2.
Insert the supplied 3V, CR2025 battery plus “+” side up.
3.
Slide the tray back into the battery compartment until it clicks.
b
Battery Note: Keep button-cell batteries away from children. Swallowing a button-cell
battery can be fatal.