Radio Shack Auvio 16-923 - Manual (Page 6)

10
S
e
tu
p
11
S
e
tu
p
LED
„
On while charging the battery.
„
Off when in use and not charging.
„
Blinks when the TV is in standby mode.
„
Blinks when using the remote.
ANTENNA
Extend and adjust for
best reception.
Joystick
„
Move up and down to adjust channels.
„
Move left and right to adjust volume.
„
Navigate menu.
POWER
External
antenna
input Headphones
jack
AV IN
IR sensor
Receives remote
information.
MENU
Access/exit the
settings menu.

„
Confirm
selections.
„
Display channel
information
Powering Your TV
Using the AC Adapter
Connect the provided AC Adapter to the DC
12V jack on the back of the TV, and then
connect it to a standard household outlet.
w
Caution
„
The adapter’s center tip must be set to positive and its
plug must fit the portable TV’s DC 12V jack. The supplied
AC adapter meets these specifications. Using an adapter that was not included may not
meet the TV’s specifications and could damage the TV or the adapter.
„
Do not leave the adapter plugged into the AC outlet or connected to the TV when you
are not using it.
„
The adapter might become warm after extended periods of use.
„
Plug the adapter into an easily accessible outlet near the TV.
Using the Car Power Adapter
Connect the provided car power adapter to the DC 12V jack on the back of the TV,
then connect it to the power port in your car.
n
Note: For your safety, start your car before you connect the car adapter.
DC 12V Stand
MAIN
POWER