Ricoh Aficio 615C - Manual (Page 70)

Appendix
56
3
❒ To prevent misfeeds, when loading OHP transparencies, check both sides of
the sheets, and place them correctly.
❒ When loading OHP transparencies, select [OHP (Transparency)] as the paper
type for the One-sheet bypass tray. For details, see “Copying from the Bypass
Tray”, Copy Reference.
❒ If [OHP (Transparency)] is specified as the paper type for the One-sheet bypass
tray, you can copy onto A4K or 8 1 /
2
“×14”K paper only.
❒ When loading thick paper ((Bypass tray : 105-163g/m 2 (28-43.4lb.), One-sheet
bypass tray: 105-220g/m 2 (28-58.5lb.)), or adhesive labels, make sure the top
of the stack is not higher than the limit mark of the paper tray. Paper capacity
varies depending on the thickness and condition of the paper.
❒ When using thick paper (Bypass tray: 105-163g/m 2 (28-43.4lb.), One-sheet by-
pass tray: 105-220g/m 2 (28-58.5lb.)), select [Thick Paper] as the paper type for
the bypass tray or one-sheet bypass tray. For details, see “Copying from the
Bypass Tray”, Copy Reference.
❒ When copying onto letterhead paper, placing orientation differs according to
the function you are using. See “Orientation-Fixed Paper or Two-Sided Pa-
per”, Troubleshooting.
❒ If you load paper of the same size in the same orientation in two or more
trays, the machine automatically shifts to the other tray when the first tray in
use runs out of paper. This function is called “Auto Tray Switching”. (How-
ever, if one tray has recycled or special paper, the settings of the other trays
must be the same for Auto Tray Switching to work.) This saves interrupting
a copy run to replenish paper when making a large number of copies. See
“Copier Features”, General Settings Guide, and “Tray Paper Settings”, Gen-
eral Settings Guide.