Raymarine L365 User Manual

Page 63

Advertising
background image

58

When the shallow alarm is set, the letter “S” will appear in
the lower left-hand corner of the normal displays. If you
move into shallow water and trigger the alarm, the letter “S”
will begin to flash, and the buzzer will sound. Press the

CLEAR

button to silence the buzzer. The letter “S” will

continue to flash until you move into deeper water.

Deep Alarm

An alarm can be set to trigger whenever the boat moves

into water which is deeper than a preset limit. Use the

<

and

V

controls to move to the line for Deep Alarm and use

the

>

control to turn this item on. Once you do this, the

display will ask which depth you want to use as a limit. Use
the

<

and

>

controls to set the limit you want. To turn this

feature off, press the < control until the display indicates
zero feet, fathoms or meters.

When the deep alarm is set, the letter “D” will appear in the
lower left-hand corner of the normal displays. If you move
into deep water and trigger the alarm, the letter “D” will
begin to flash, and the buzzer will sound. Press the

CLEAR

button to silence the buzzer. The letter “D” will continue to
flash until you move into shallower water.

Note: You may want to use both the Shallow Alarm and
Deep Alarm features when you are anchored. Set the limits
just a bit to either side of your anchor depth. When set this
way, the unit will trigger an alarm if the anchor drags and
the boat moves into shallower or deeper water.

Fish Alarm

This unit has an alarm which will trigger when the unit
detects a fish. Use the

<

and

>

controls to turn this item on

or off. The fish alarm feature will work even if the fish
symbols are turned off.

When the fish alarm is set, the fish symbol will appear in
the lower left-hand corner of the normal displays.

Buzzer

A buzzer can be set to sound when any of the alarm
conditions occurs (shallow, deep, or fish alarm). For the
shallow or deep alarms, the “S” or “D” symbol at the bottom
of the screen flashes. By pressing the

CLEAR

button, you can

Setup Instructions

Advertising