Roland RK-500 - Manual (Page 134)

133
Settings
The point detected by the touch screen may drift as you use
the VIMA for an extended time. If you notice such a drift, you
can correct it by calibrating the touch screen as follows.
1. Access the main screen.
If the main screen is not shown, press the [EXIT] button
several times to access the main screen.
fig.d-MainScreen.eps
2. In the main screen, touch <Menu>.
The menu screen appears.
fig.d-Function-01-2.eps
3. Touch <Touch Screen>.
A screen like the following appears.
fig.d-touchpanel-1.eps
If you decide to cancel the touch panel position
adjustment, touch <Cancel>.
4. Touch <OK>.
5. A point will be indicated. Touch this point.
fig.d-touchpanel-2.eps
If you touch a point other than the indicated one, the
drift may become extremely severe. Be sure to touch
the correct point.
Calibrating the Touch Screen
(Touch Screen)
NOTE
RK-500-e.book 133 ページ ２００６年８月１１日 金曜日 午後４時２９分