144 troubleshooting – Roland RK-500 User Manual
Page 145

144
Troubleshooting
Something’s wrong with the sound from the microphone
Mic volume is too low
(or inaudible)
Is the mic connected correctly?
Could the VOCAL [LEVEL] knob be turned to the minimum position?
The mic volume is adjusted with the VOCAL [LEVEL] knob; not by the
[VOLUME] knob.
Your voice in the mic sounds
wrong
Could the [ECHO] button be lit?
If the [ECHO] button is lit, echo (reverberation) will be added to your voice in
the mic.
Could the [VOCAL EFFECTS] button be lit?
If the [VOCAL EFFECTS] button is lit, an effect will be applied to your voice in
the mic.
The volume of the mic changes
Turning the panel [VOLUME] knob will adjust the overall volume including the
mic volume.
If you want to adjust the mic volume, use the [VOLUME] knob to adjust the
volume of the entire VIMA, and then use the VOCAL [LEVEL] knob to adjust the
mic volume.
Symptom
Cause/Action
Page
RK-500-e.book 144 ページ 2006年8月11日 金曜日 午後4時29分