Ricoh 3260 - Manual (Page 84)

Configuring/Registering Scan Settings
76
7
Making the Settings Related to the
Orientation of the Original and Scanned
Sides
To correctly display the top/bottom
orientation of a scanned original on a
client computer, original orientation
and page flow must be set when plac-
ing the original.
For E-mail, Scan to Folder, and
a Network Delivery Scanner
AAAA
Make settings for 1 Sided Origi-
nal/2 Sided Original, Original
Orientation, SADF/Batch, Mixed
Sizes, and Divide.
Note
❒ The defaults can be changed us-
ing [Original Setting], [Original Ori-
entation Priority]
, [Switch to Batch],
[Mixed Original Sizes Priority] of
[Scanner Features]
. See p.100
“Scan Settings”.
One-sided original/Two-sided
original selection
A When scanning one-sided orig-
inals, make sure that [1 Sided
Orig.]
is selected.
B When scanning two-sided orig-
inals, press [2 Sided Orig.] to se-
lect [2 Sided Orig.: T to T] or [2
Sided Orig.: T to B]
according to
the binding orientation of the
original.
C When the last page of two-sid-
ed originals is blank, select [1
Side]
to skip that side and fin-
ish scanning, or select [2 Sides]
to scan that side as a blank
page.
Note
❒ When [1 Side] is selected for
[Last Page] , the file size will
be bigger than a file resulting
from individually scanning
the same pages. If the size of
the e-mail exceeds the limit
specified, the e-mail cannot
be sent. In this case, change
the setting of [Max. E-mail Size]
of [Scanner Features]. See
p.104 “Send Settings”.
❒ If you select [Divide], the set-
ting made here is valid for
the last page of the divided
original.
D Press [OK].
Top to top
original:
Top to bot-
tom original: