Ryobi PBC3046B - Manual (Page 8)

8
GRASS DEFLECTOR AND BLADE GUARD
USE
NOTE: When converting from brushcutter to string trimmer,
or string trimmer to brushcutter, make sure the correct
guard/deflector is being used.
See Figure 5.
MUFFLER GUARD ASSEMBLY
See Figure 4.
1. Remove muffler guard and two screws from the owner's
kit.
2. Attach the muffler guard to the rear housing.
NOTE: Make sure the bent end of the muffler guard fits
securely into the opening of the rear housing.
3. Using the torx wrench supplied, install the two screws
and tighten securely.
ASSEMBLY
Fig. 4
BENT END OF
MUFFLER GUARD
OPENING IN REAR
HOUSING
SCREWS
MUFFLER
GUARD
REAR HOUSING
TORX
WRENCH
ATTACHING THE SHOULDER STRAP
See Figure 3.
1. Connect the latch on the shoulder strap to the strap
hanger.
2. Adjust the strap to a comfortable position.
NOTE: To quickly release the product from the shoulder
strap, sharply pull the quick release tab.
SHOULDER
STRAP
LATCH
STRAP HANGER
QUICK
RELEASE
TAB
Fig. 3
GRASS DEFLECTOR FOR
STRING TRIMMER USE
BLADE GUARD FOR
BRUSHCUTTER USE
Fig. 5