RCA 21015 User Manual
Page 15
15
R
INGER
T
ONE
This setting may be made with the handset and base. You may choose
from six different ringer tones.
1. Use the touch-tone pad on your handset or base to select
1, 2, 3, 4, 5, 6
or use the or
buttons on the handset or the base to select 1, 2, 3, 4,
5 or 6 . The default setting is 1.
NOTE:
When you use the handset or base to set a ringer tone, the ringer tone
plays after you make your selection.
2. Press the program/mute button to save. You will hear a confirmation
tone, and the ringer tone displays for two seconds.
If you are programming the base:
a.
SET TONE/PULSE 1TONE 2PULSE shows in the display.
b. Go to step one in the TONE/PULSE section.
If you are programming the handset:
a.
REGISTRATION 1YES 2NO shows in the display.
b. Go to the Registration section.
BASE DISPLAY
HANDSET DISPLAY
NOTE:
Press the EXIT button once to keep the previous setting and return to
standby mode.
RINGER TONE - 2
SET TONE / PULSE
1 TONE 2 PULSE
REGISTRATION
1 YES 2NO