RCA 21015 - Manual (Page 33)

33
T
O
C
HANGE
:
Use the same procedure to change a stored number as you do to store a
number - replace one stored phone number with another.
T
O
D
ELETE
:
1. Make sure the phone is OFF (not in talk mode).
2. Press the mem button.
3. Press the or
button on the handset or base to scroll to a
desired record.
4. When the record shows in the display, press the FLASH/DELETE button
to mark the record for deletion. The display shows DELETE?
5. Press the mem button again to delete the record. The display shows
DELETED for two seconds. You will hear a confirmation tone.
NOTE: If you don’t want to change or delete a number, simply press the EXIT
button, or wait for one minute to exit the review mode.
D
IALING A
S
TORED
N
UMBER
H
ANDSET
1. Make sure the phone is ON by pressing the talk/callback button.
2. Press the mem button.
3. Enter the memory location number (01-50) for the desired memory
location. The number dials automatically.
-OR-
DELETE ?
317 - 123 - 4567
0 3
MEMO
#
* * DELETED * *