RCA 21015 - Manual (Page 32)

32
S
TORING A
R
EDIAL
N
UMBER
1. Make sure the phone is OFF (not in talk mode).
2. Press the mem button.
3. Press any number key (01-50) to store the phone number in that
memory location, or press the or button on the handset or base to
select the memory location.
4. Press the mem button and ENTER NAME shows in the display.
5. Use the touch-tone pad on your handset or base to enter the name, then
press the mem button and ENTER TEL NUMBR shows in the display.
6. Press the redial button to display the redial number.
7. Press the mem button again to confirm.
NOTE: If the redial number has more than 20 digits, the redial number
cannot be stored in base or handset memory.
I
NSERTING A
P
AUSE IN THE
D
IALING
S
EQUENCE
If a pause is needed to wait for a dial tone press the # pause button to
insert a delay in dialing sequence of a stored telephone number (for
example, after you dial 9 for an outside line, or to wait for a computer
access tone.) Each pause counts as one digit in the dialing sequence.
R
EVIEWING
, C
HANGING OR
D
ELETING
S
TORED
N
UMBERS
T
O
R
EVIEW
:
1. Make sure the phone is OFF (not in talk mode).
2. Press the mem button.
3. Press the or
button on the handset or base to scroll through the
stored numbers. Or use the touch-tone pad on your handset or base to
enter the memory location number.
PETER CHAN
317 - 123 - 4567
0 3
MEMO
#