Renesas Emulation Probe M30850T2-EPB - Manual (Page 64)

M30850T2-EPB User’s Manual 3. Usage (How to Use the Emulator Debugger)
REJ10J1005-0200 Rev.2.00 April 1, 2007
(3) When DATA ACCESS is selected
1. Window for setting the address
2. Window for setting data
Setting the address
You can set eight conditions, e.g., a specified address, a
specified address range, etc.
Setting data
You can set eight conditions, e.g., a specified data, a
specified data range, etc.
Setting the access condition
You can set three conditions, e.g., read, write, and
read/write. When you have finished setting the data and
access condition, click OK.
Page 64 of 98