Warning – Renesas Emulation Probe M30850T2-EPB User Manual

Page 7

Advertising
background image

M30850T2-EPB User’s Manual

Precautions for Safety

REJ10J1005-0200 Rev.2.00 April 1, 2007

WARNING

Warnings for AC Power Supply:

z If the attached AC power cable does not fit the receptacle, do not alter the AC power cable and do not plug it

forcibly. Failure to comply may cause electric shock and/or fire.


z Use an AC power cable which complies with the safety standard of the country.

z Do not touch the plug of the AC power cable when your hands are wet. This may cause electric shock.

z This product is connected signal ground with frame ground. If your developing product is transformless (not

having isolation transformer of AC power), this may cause electric shock. Also, this may give an unrepairable
damage to this product and your developing one.
While developing, connect AC power of the product to commercial power through isolation transformer in
order to avoid these dangers.


z If other equipment is connected to the same branch circuit, care should be taken not to overload the circuit.

z When installing this equipment, insure that a reliable ground connection is maintained.

z If you smell a strange odor, hear an unusual sound, or see smoke coming from this product, then disconnect

power immediately by unplugging the AC power cable from the outlet.
Do not use this as it is because of the danger of electric shock and/or fire. In this case, contact your local
distributor.


z Before setting up this emulator and connecting it to other devices, turn off power or remove a power cable to

prevent injury or product damage.

Warnings to Be Taken for This Product:

z Do not disassemble or modify this product. Personal injury due to electric shock may occur if this product is

disassembled and modified. Disassembling and modifying the product will void your warranty.


z Make sure nothing falls into the cooling fan on the top panel, especially liquids, metal objects, or anything

combustible.

Warning for Installation:

z Do not set this product in water or areas of high humidity. Make sure that the product does not get wet. Spilling

water or some other liquid into the product may cause unrepairable damage.

Warning for Use Environment:

z This equipment is to be used in an environment with a maximum ambient temperature of 35°C. Care should be

taken that this temperature is not exceeded.

Page 7 of 98

Advertising