Renesas Emulation Probe M30850T2-EPB - Manual (Page 70)

M30850T2-EPB User’s Manual 3. Usage (How to Use the Emulator Debugger)
REJ10J1005-0200 Rev.2.00 April 1, 2007
(3) Trace point setup dialog box
1. Opening the trace point setup dialog box
2. Trace Point Setting Window in initial state
Trace Point
Clicking this toolbar button opens the trace point setting
window.
Trace Point Setting Window in initial state
Be sure to enable the trace point function in the Init dialog
box before you set up in this window. Here, you can set
events in the same way as for the hardware breakpoints.
Page 70 of 98