Roland SD-50 - Manual (Page 49)

49
Using the SD-50 as a MIDI Sound Module
For each part, you can adjust its volume and other settings, and apply effects to the sound.
You can “mute” a specific part so that it will not produce sound.
Conversely, you can “solo” a specific part so that it will play while all of the other parts are muted.
1. Press the [PART] button a number of times to access the MIDI part screen.
page_part_meter.eps
2. Turn the [VALUE] dial to select the part that you want to mute or solo, and then press the [ENTER]
button.
page_part_meter-1.eps
3. Turn the [VALUE] dial to change the setting.
page_part_meter-s.eps
The mute and solo settings will be saved in internal memory if you save the studio set (p. 54).
Adjusting the Settings of Each Part
Muting/Soloing a Part
Setting Explanation
M Muted
S Soloed
SD-50_e.book 49 ページ ２０１０年１月２５日 月曜日 午前１０時５２分