Roland SD-50 - Manual (Page 73)

73
System Settings
System Setting List
Indication Range Explanation
LCD Contrast 1–10
Adjusts the brightness of the display.
Higher settings make the display brighter.
GM TYPE
CLASSICAL,
CONTEMPORARY
Switches the GM sound type.
•
Classical
The basic sound set that blends well with an ensemble.
You can also choose this if GM2 data compatibility is important.
• Contemporary
A sound set that emphasizes the realism of each instrument. This setting is selected
when the power is turned on.
Master Tune 415.3–466.2 Hz
Adjusts the tuning of the entire SD-50. The displayed value is the frequency of the A4
key (middle A).
Output Gain -12– +12 dB
Adjusts the SD-50’s output gain so that the output level will be suitable when recording
to an external device.
Minus One
PART 1–PART16,
4&5, 1&4&5,
EXCEPT 10,
EXCEPT 2&10
This specifies the part(s) that will be muted when you use the Player function to play
back SMF data (p. 69).
Battery ALKALINE, Ni-MH
Selects the type of battery that’s being used.
ALKALINE: Alkaline batteries
Ni-MH: Nickel-metal hydride batteries
Mastering
OFF,
SHARP,
CLEAR, POWER
This effect is provided for use on the output of the sound generator; it makes the sound
more consistent and powerful. Choose the setting that’s appropriate for your particular
song. Use this if you’re creating music that will be made into an audio CD.
SHARP: The low-frequency and high-frequency ranges will be emphasized.
CLEAR: The high-frequency range will be controlled.
POWER: The mid-frequency range will be emphasized.
Auto Power Off Time
OFF, 5min,
30min Specifies the time after which the power will automatically turn off if the SD-50 has not
been operated.
Auto Save Mode
OFF, 1min, 3min,
5min, 10min,
15min, 20min,
30min, 60min
Specifies the time after which the SD-50 will automatically enter power-conservation
mode if no operation has been performed. When power-conservation mode is
activated, the SD-50 will be in the following state to conserve power consumption.
•
Display backlight will turn off
• BATTERY indicator will blink
• MIDI IN will not operate
Press the [ENTER] button to cancel power-conservation mode.
SD-50_e.book 73 ページ ２０１０年１月２５日 月曜日 午前１０時５２分