System settings, Basic procedure for system settings, Em settings (p. 72) or use the – Roland SD-50 User Manual
Page 72: In “system settings” (p. 72)
72
System Settings
Here you can make “system” settings that apply to the overall operation of the SD-50, such as the tuning and the
brightness of the display.
1.
Press the [MENU] button.
The menu screen will appear.
menu-1.eps
2.
Turn the [VALUE] dial to select the parameter that you want to edit, and then press the [ENTER]
button.
The value of the selected parameter will be highlighted.
menu-2.eps
3.
Turn the [VALUE] dial to edit the value, and then press the [ENTER] button.
4.
When you’ve finished making settings, press the [MENU] button.
The following message will appear.
fig.screen.eps
If you decide to cancel, press [EXIT].
5.
If you decide to execute, press the [ENTER] button.
When the settings have been written, the following screen will appear, and then you’ll return to the menu screen.
menu-3.eps
Basic Procedure for System Settings
SD-50_e.book 72 ページ ２０１０年１月２５日 月曜日 午前１０時５２分