Radio Shack 32-2058 - Manual (Page 7)

7
The Basics
connecting inputs
LINE 1, 2, 3, 4, 5, 6 — connect up to six audio
sources to your mixer. Do not connect
audio sources with line-level outputs to
the PHONO 1, PHONO 2, or AUX MIC jacks.
PHONO 1/2 — connect up to two low-level audio
sources to your mixer. If you connect a magnetic-
cartridge turntable, connect its ground wire to GND.
EFFECT SEND/RECEIVE — connect a
sound effect device to EFFECT SEND
(output) and EFFECT RECEIVE (input).
AUX LINE MONO — connect a
mono input source here.
GND
AUX MIC — connect a
microphone with a
1 /
4
-inch plug here.
connecting power
Connect the mixer’s power cord to a standard AC outlet.