Runco Vision 85 - Manual (Page 65)

Operation
Vidikron Vision 85 Owner’s Operating Manual 53
PRE
L
IMINAR
Y
Language The Vision 85 OSD language is initially set to English, but can also display the menus in
German (Deutsch), Spanish (Español), French (Français) or Italian (Italiano). To change the
OSD language:
1. Press MENU.
2. Press or to select Language from the Main Menu.
3. Press up- or down-arrow button ( or ) to highlight the desired language and press
ENTER. The change takes effect immediately.
Picture Adjust To perform basic picture quality adjustments, select Picture Adjust from the Main Menu and
proceed as follows:
Picture Memory: The Vision 85 lets you save image quality settings as presets that you can
recall at a later time. For digital 1080i and 1080p sources, you can create up to six presets.
To recall and/or change the settings associated with a preset, select Picture Memory from the
Picture Adjust menu. Press
, then press or until your choice is highlighted. To confirm
your selection, press ENTER.
The default settings for each preset are described in Table 4-2. Contrast, Brightness, Color,
Tint and Sharpness are all set to zero (0) by default. These provide convenient starting points
for calibrating the projector to suit different viewing environments. Any picture quality
adjustments you make here are stored in the currently-selected preset.
English
Deutsch
Español
Français
Italiano
Language
Contrast 0
Brightness 0
Color 0
Picture Memory 1
Tint 0
Sharpness 0
CLR Temp. 7500
White Balance 1
VAC :Iris 1
Lamp Power Hi
Advanced
Default
Picture Adj.
Table 4-2. Default Picture Memory Settings for Digital 1080i and 1080p
Sources
Picture
Memory
Setting
Description
Default Settings for Selected Picture Memory
Remote Control Key
Col
o
r Temp.
VAC (Iris)
Lamp Power
Sh
a
rpness
Enhancem
ent
Auto
Contrast
Standard
or Custom Provides good picture
quality under the widest
variety of viewing
conditions. 7500 High
Brightness Hi
(220W) Off Off –
Black
Enhance Similar to “Standard” mode,
but with enhanced black
levels. 7500 CRT
Emulation Hi
(220W) Off 1 CUST
1
White
Enhance Similar to “Standard” mode,
but with enhanced white
levels. 7500 High
Brightness Hi
(220W) 1 Off CUST
2
ISF Day For viewing images with the
brightness slightly
decreased in a darkened
room. 6500 Theater Low
(180W) Off Off ISF
DAY