Radio Shack 40-1430 - Manual (Page 2)

2
3. Install four AA batteries according to the polarities
marked inside the battery compartment.
±
4. Replace the battery compartment cover.
5. To test the battery power, slide POWER to ON . The
indicator lights.
#% 2 19'4
You can also power the speakers from a standard AC outlet
using an optional AC adapter (not supplied).
Cautions:
You must use a Class 2 power source that
supplies 6V DC and delivers at least 400 mA.
Its center tip must be set to positive and its
plug must fit the speaker's DC 6V jack. Using an adapter
that does not meet these specifications could damage
the speakers or the adapter.
Slide POWER to OFF , then connect the AC adapter’s barrel
plug to the portable speaker’s DC 6V jack. Plug the other
end of the AC adapter into a standard 120V AC outlet. ±
±
$#66'4; 016'5
±
• Dispose of old batteries
promptly and properly.
• Do not burn or bury batteries.
• Use only fresh batteries of the
required size and
recommended type.
• Do not mix old and new
batteries, different types of
batteries (standard, alkaline, or
rechargeable), or rechargeable
batteries of different capacities.
• If you do not plan to use the
speakers for more than two
weeks, remove the batteries.
Batteries can leak chemicals
that can destroy electronic
parts.
DC 6V Jack
Speaker Cable
Stereo Plug
!
±
016'
±
When you connect AC power, the
battery power is automatically
disconnected.