RCA VR636HF - Manual (Page 17)

15
Setting Up the VCR
3. Press 2 to display the ADD/REMOVE CHANNELS screen. Use CHAN
up or down or number buttons to go to the channels you want
to remove or add.
ADD/REMOVE CHANNELS
Channel 115
is presently ADDED
Press CLEAR to remove
Press MENU to exit
Time and Date
The VCR gives you two ways to set the time and date. The Auto
Clock feature which enables the VCR to update the clock each
time you turn off the VCR. The Auto Clock feature is
advantageous because it updates the time for you automatically.
The second way is entering the time and date manually into the
menu system.
Auto Clock SET Feature
The Auto Clock feature is set to ON at the factory. In the ON
setting, the VCR looks for a channel carrying XDS (Extended Data
Services) information and updates the clock using the
Coordinated Universal Time. There are certain steps that are
required, such as Auto Channel Search, setting the Time Zone,
and setting the Daylight Savings feature, before the Auto Clock
feature works.
Set the Time Zone
1. Press MENU to display the VCR MAIN MENU.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Setup
6 Preferences
7 Audio
8 Language
0 Exit
ADD/REMOVE CHANNELS
Channel 115
is presently REMOVED
Press INFO to add
Press MENU to exit
Selecting Channels
The CHANNEL up and down buttons
access those channels active in your
VCR channel list.
You can still access channels not in
the channel list by using the number
buttons on the remote.
Auto Clock Info
With a cable box, the VCR will not
reset the clock after a power outage
unless the cable box is set to the
channel carrying the broadcast signal.
If AUTO CLOCK SET is unsuccessful,
try tuning the VCR (or cable box) to a
channel carrying the XDS information
(usually PBS), then turn the VCR off.
If the time does not set within 10
minutes, set the time and date
manually through the menu items.
Check local cable system or TV
stations for availability of channels
with XDS.