Tv with audio/video jacks, Connections, Using this connection – RCA VR636HF User Manual
Page 55
53
connections
TV
VCR
3 CH. 4
VIDEO
AUDIO
IN
OUT
ANT. IN
RF OUT
L
R
CABLE/
ANTENNA
CABLE, CABLE BOX, OR ANTENNA
INPUT 1
VIDEO
R
L/MONO
S-VIDEO
AUDIO
OUTPUT
R
L
INPUT 2
VIDEO
R
L/MONO
TV with audio/video jacks
This connection assumes:
•
You are connecting an antenna, cable, or cable box system.
•
Your television has audio/video jacks.
This connection provides:
•
Stereo sound playback from VCR.
•
Record one channel while watching another (except when
using a cable box for all channels).
To use this connection, you must have:
•
(1) coaxial cable for cable/antenna connection; (2) for
cable box
•
(3) audio/video cables
If your cable box is remote controllable:
•
Position it above the VCR as shown. Make sure not to block
any of the VCR’s ventilation holes.
To connect:
1.
Connect cables as shown.
2.
Return to First Things First, then follow the steps.
Using This Connection
Tune your TV to its video input channel. Use of TV•VCR button is
not required.
Auto TV/VCR Setting:
•
Set the Auto TV/VCR feature to OFF.
To play a tape:
1.
Insert a tape.
2.
If necessary, press PLAY.
To record one program and watch another:
1.
Begin recording a program using one of the
recording features.
2.
Select a different channel on the TV.
CABLE BOX
VCR'S
SIGNAL
Position Remote-Controllable
Cable Box
VCR
TRANSMITTER