Cassette player operation, Loading a cassette tape, Playing a cassette tape – Radio Shack CD-3318 User Manual

Page 15

Advertising
background image

15

CASSETTE PLAYER OPERATION

Your CD-3318 uses a dual-cassette
deck system, which lets you play cas-
sette tapes from either of two decks
and record from a variety of sources.

LOADING A CASSETTE
TAPE

Note: Take up any slack in the tape by
turning the cassette’s hub with a pen-
cil. If you do not remove excess slack,
the tape might become tangled in the
record/playback mechanism. Avoid
touching the tape.

1. Press

STOP/EJECT

to open

the cassette compartment cover.

2. Insert the cassette tape into the

tape guides on the compartment
door with the side you want to
play facing you and the exposed
tape edge facing down.

3. Close the cover.

PLAYING A CASSETTE
TAPE

Single Play

After loading a cassette tape in either
deck, follow these steps to play it.

1. Set

RADIO.CD OFF

to

TAPE

.

2. Press

PLAY

on the appropriate

deck. The POWER indicator lights
and the tape player plays the cas-
sette tape until it reaches the end,
then it automatically stops.

Notes:

• To temporarily stop playback,

press

PAUSE

. Press

PAUSE

again to resume playback.

14-542.fm Page 15 Wednesday, June 30, 1999 3:38 PM

Advertising