Radio Shack CD-3318 - Manual (Page 18)

18
Caution: If you use a cassette tape
with the erase-protection tabs re-
moved, do not force down
RECORD .
This can damage the mechanism. See
“Preventing Accidental Erasure.”
Notes:
• To temporarily stop recording,
press PAUSE . Press PAUSE
again to resume recording.
• To stop recording, press STOP/
EJECT .
Dubbing (Copying) Tapes
You can copy from one cassette tape
to another at normal or high speed.
Follow these steps to copy a cassette
tape.
1. Load the tape you want to copy
into Tape 2.
2. Load a blank tape (or one you
want to record over) into Tape 1.
3. Set RADIO.CD OFF to TAPE .
4. Press HI-SPEED DUBBING to dub
at twice the normal speed.
Note: High speed dubbing pro-
duces a slightly lower quality
recording, but is useful for quicker
recording.
5. Press PAUSE then RECORD
on Tape 1. PAUSE , RECORD ,
and PLAY lock down.
Caution: If you use a cassette
tape with the erase-protection
tabs removed, do not force down
RECORD . This can damage the
mechanism. See “Preventing
Accidental Erasure.”
6. Press PLAY on Tape 2. Tape 1
automatically releases PAUSE
and copying begins from Tape 2 to
Tape 1.
Notes:
• To temporarily stop copying, press
PAUSE on both tape decks.
Press PAUSE again to resume
recording.
• Press STOP/EJECT on both
decks to stop copying.
14-542.fm Page 18 Wednesday, June 30, 1999 3:38 PM