Raymarine autopilot control unit - Manual (Page 31)

14 ST7000 Plus Autopilot Control Unit Owner’s Handbook
D4212-1
• If the required data for a page is not available, dashes are displayed
instead of a value.
• Most displays are repeated data, and cannot be adjusted. The
exceptions are the INST REM (ST60/ST80 Instrument Remote
Control) and the MAXI REM (ST80 Maxiview Remote Control)
pages (if selected for display). Setting up instructions for these are
given in Chapter 4, Customising the System.
• The current autopilot mode is always shown at the top of the
display, and the autopilot bar graph remains in use.
Waypoint names
Where waypoint names have been allocated, they are displayed on the
Distance To Waypoint (
DTW), Cross Track Error (XTE) and Bearing To
Waypoint ( BTW) Data Pages.
D4326-1
118ch02.p65 07/01/99, 12:41 14