Ricoh Aficio 2025 - Manual (Page 72)

User Tools (System Settings)
60
4
❒ The machine may not shift to "Sleep Mode” at the set time, if the main pow-
er switch has just been turned on and functions other than copier function
are still in the process of starting up.
❖ Panel Off Timer
Set the amount of time the machine waits before switching the panel off after
copying has finished or performing the last operation.
Note
❒ Default: 1 minute
❒ Enter a time interval between 10 seconds and 240 minutes, using the
number keys.
❖ System Auto Reset Timer
The System Reset setting automatically switches the screen to that of the func-
tion set in Function Priority. When no operations are in progress, or when an
interrupted job is cleared. This setting determines the system reset interval.
See p.53 “Function Priority”.
Note
❒ Default: On, 60 seconds
❒ The time can be set from 10 to 999 seconds, using the number keys.
❖ Copier/Document Server Auto Reset Timer (copier/Document Server)
Specifies the time to elapse before copier and Document Server modes reset.
Note
❒ If [Off] is selected, the machine does not automatically switch to the user
code entry screen.
❒ Default: On, 60 seconds
❒ The time can be set from 10 to 999 seconds, using the number keys.
❖ Facsimile Auto Reset Timer (facsimile)
Specifies the time to elapse before the facsimile mode resets.
Note
❒ Default: 30 seconds
❒ The time can be set from 30 to 999 seconds, using the number keys.
❖ Printer Auto Reset Timer (printer)
Specifies the time to elapse before the printer function resets.
Note
❒ Default: On, 60 seconds
❒ If [Off] is selected, the machine does not automatically switch to the user
code entry screen.
❒ The time can be set from 10 to 999 seconds, using the number keys.