Radio Shack Trunk Mount - Manual (Page 14)

14
Connecting Four Speakers
1. Connect one end of a speaker wire’s marked conductor to the amplifier’s
FL
+
(front-left positive) terminal.
2. Connect one end of the speaker wire’s unmarked conductor to the ampli-
fier’s FL
-
(front-left negative) terminal.
3. Repeat Steps 1 and 2 to connect a speaker wire to the amplifier’s FR (front-
right) terminals.
4. Repeat Steps 1
-
3 to connect speaker wires to the amplifier’s RL (rear-left)
and RR (rear-right) terminals.
5. Connect the other ends of the four speaker wires so FL connects to the
front-left speaker, FR to the front-right speaker, RL to the rear-left speaker,
and RR to the rear-right speaker.
12-1976.fm Page 14 Tuesday, July 13, 1999 10:01 AM