Radio Shack Trunk Mount - Manual (Page 15)

15
Connecting Two Speakers
If you are connecting only two speakers, you can connect them to the amplifier’s
front (
FL and FR ) or rear ( RL and RR ) speaker terminals.
1. Connect one end of a speaker wire’s marked conductor to the amplifier’s
FL
+
(front-left positive) or RL
+
(rear-left positive) terminal.
2. Connect the end of the speaker wire’s unmarked conductor to the ampli-
fier’s FL
−
(front-left negative) or RL
−
(rear-left negative) terminal.
3. Repeat Steps 1 and 2 to connect a speaker wire to the amplifier’s FR
+
and
FR
−
(front-right) or RR
+
or RR
−
(rear-right) terminals.
4. Connect the other ends of the speaker wires so FL connects to the front-left
speaker and FR to the front-right speaker, or RL connects to the rear-left
speaker and RR connects to the rear-right speaker.
12-1976.fm Page 15 Tuesday, July 13, 1999 10:01 AM