Radio Shack Trunk Mount User Manual

Page 19

Advertising
background image

19

2. Temporarily turn up the autosound system’s volume control to about one-

third of its full range.

Caution: Never turn the level controls up any farther than you need to get
clear sound at two thirds volume maximum.

3. Turn either the left or right

LEVEL

control clockwise until you can hear the

sound at a comfortable level.

4. Turn up the volume on your autosound system until the sound begins to dis-

tort. Then immediately turn down the volume to the point just below where
distortion began.

5. Adjust the level controls until the volume is at the maximum level you want

the autosound system to produce.

6. Adjust the autosound system’s volume control to a comfortable listening

level.

12-1976.fm Page 19 Tuesday, July 13, 1999 10:01 AM

Advertising