Regent Sheffield MS249R - Manual (Page 6)

6
Test Setting
Lights should turn on with
motion both day and
night. Lights should turn
off after 6 seconds
of no motion.
TEST
Keep the power to
the fixture on.
Motion Activated
(auto setting)
Lights should turn on with
motion only at night and
should turn off after
4 minutes of no motion.
AUTO
Keep the power to
the fixture on.
Mode of
operation:
Set slide switch
on sensor to:
How to set
power switch:
2 Hour
NIGHT TIME ON then
Motion Activated
Lights should turn on
automatically at night for
2 hours, then reset to
regular motion
setting for the remainder
of the evening. Lights
should turn off after
8 minutes of no motion.
NIGHT TIME ON
2 HR
(2 Hours)
Note: Once the light has come onin
the selected NIGHT TIMEONmode,
you cannot change the mode setting
until the next dawn. The light will
operate in the first NIGHT TIMEON
mode selected (2 hour or 4 hour),
even if changed.
Keep the power to
the fixture on.
4 Hour
NIGHT TIME ON then
Motion Activated
Lights should turn on
automatically at night for
4 hours, then reset to
regular motion
setting for the remainder
of the evening. Lights
should turn off after
8 minutes of no motion.
NIGHT TIME ON
4 HR
(4 Hours)
Note: Once the light has come onin
the selected NIGHT TIMEONmode,
you cannot change the mode setting
until the next dawn. The light will
operate in the first NIGHT TIMEON
mode selected (2 hour or 4 hour),
even if changed.
Keep the power to the
fixture on.
(continued)
Dusk to Dawn Setting
Override Mode
(activated only at night)
Lights should stay on
from dusk to dawn and
then reset to the AUTO
or NIGHT TIME ON
setting next dawn.
AUTO
or
ALL NIGHT TIME
ON MODES
Turn the power off
for 5 seconds then
back on.
How to select your desired feature of the motion detector
MS249R_MS249RW 325-1486.qxd 6/20/06 4:02 PM Page 6