Setting the day/time, Setting auto talk – Radio Shack 900 MHz User Manual

Page 13

Advertising
background image

13

Installation

SETTING THE DAY/TIME

You must set the day of the week and time
so the answering system can record the cor-
rect day and time of each message.

Note: Enter each key press within about 2
minutes. Otherwise, the answering system
exits the time setting process and you must
begin again with Step 1.

1. Hold down

CLOCK

until the answering

system beeps. The answering system
announces the currently set day of the
week and displays the day’s number (0
for Sunday, 1 for Monday, and so on).

2. To change the day, repeatedly press

SKIP

to move forward or

REPEAT

to

move backward until the correct day
appears, then press

CLOCK

. The

answering system announces the hour.

3. To change the hour, repeatedly press

SKIP

or

REPEAT

until the correct hour

appears, then press

CLOCK

. The

answering system announces the min-
utes.

4. To change the minutes, repeatedly

press

SKIP

or

REPEAT

until the correct

minutes appear, then press

CLOCK

. The

answering system announces “AM” or
“PM,” and

A

or

P

appears.

5. Press

SKIP

or

REPEAT

to change this

setting, then press

CLOCK

. The answer-

ing system beeps and announces the
day and time.

To check the day and time, press

CLOCK

.

The answering system announces the cur-
rently set day and time.

Note: If power fails, the clock retains the cur-
rent time. When the power is restored, it
starts counting again from the time the power
failed.

SETTING AUTO TALK

Your phone is preset so you must press

TALK

to answer a call. With auto talk turned

on, you can answer a call by lifting the hand-
set from the base, or, if the handset is away
from the base, by pressing any key.

Follow these steps to turn auto talk on or off.

1. Lift the handset and press

FUNCTION

.

The Caller ID setup menu appears on
the display with

Auto

Talk

selected.

2. Press

CH/SELECT

to change the auto

talk setting.

On

or

Off

appears indicat-

ing the selected setting.

3. To clear the display when you finish,

press

FUNCTION

or return the handset to

the base.

REPEAT

CLOCK

SKIP

CH SELECT

FUNCTION

VOL/CID

DELETE

43-749.fm Page 13 Tuesday, September 5, 2000 11:24 AM

Advertising