Radio Shack 900 MHz User Manual
Page 28
28
Troubleshooting
If you still have problems, disconnect the answering system. If other phones on the same line
work properly, the fault is in this phone or its installation. If you cannot find the problem, take
your phone to your local RadioShack store for assistance.
The answering system does not
answer calls.
Make sure the answering system is turned on.
Make sure the AC adapter is properly connected.
Check all phone line connections.
The answering system does not
record callers’ messages.
REC TIME is set to ANN (announcement only). Set it to 1 or 4.
Delete messages if memory is full.
Low
Battery
flashes on the dis-
play every few seconds.
Be sure the battery pack is correctly connected.
You have an incoming call, but do not
receive any Caller ID information.
Let the phone ring twice before you answer so the system has
time to record the Caller ID information.
Check that the system is correctly and securely connected.
Call your phone company to verify that your Caller ID service is
active.
Problem
Suggestion
43-749.fm Page 28 Tuesday, September 5, 2000 11:24 AM