Radio Shack TOUCHSCREEN REMOTE - Manual (Page 11)

ASSIGNED TO A DEVICE KEY . I F YOUR ORIGINAL REMOTE OPERATES MORE
THAN ONE DEVICE ( FOR EXAMPLE , A RECEIVER , CD PLAYER , AND CAS -
SETTE PLAYER IN ONE REMOTE ), YOU NEED TO SET UP EACH DEVICE
SEPARATELY .
• W RITE YOUR CODE IN THE BOXES PROVIDED ON PAGE 26, FOR QUICK ,
EASY REFERENCE .
Devices types that can be set up under the
following mode keys:
To set up a second TV, VCR, SAT, CD, AUD or DVD,
see page 36.
Programming a TV/VCR Combo
1. Find the codes for the devices you want to pro-
gram in Setup Codes for TV/VCR Combos on
page 55 and write them down or highlight
them.
2. Turn on the TV/VCR Combo and insert a video-
cassette.
3. Press and release VCR.
4. Hold down P for at least 3 seconds. The bottom
of the IR Indicator blinks twice, and a circle
appears around P.
5. Enter your four-digit code using the number
keys. The bottom of the IR Indicator blinks
once after each of the first three digits are
entered, and blinks twice after the fourth digit
to confirm that a valid four-digit code has been
entered.
6. Aim your remote at your TV/VCR and press
POWER . If your television switches off, your
remote should be ready to control your
TV/VCR.
Quick Start Guide 11
U
SER
’
S
G
UIDE
- TV
- S ATELLITE
R ECEIVER
- C ABLE B OX
- V IDEO A CCESSORY
- A MP /T UNER
- A MPLIFIER
- H OME T HEATER
- CD P LAYER
- H OME A CCESSORY
- VCR
- C
ASSETTE P LAYER
- D IGITAL A UDIO T APE
- PVR
- DVD
- L
ASER D ISK P LAYER
- XBOX
- P
LAYSTATION 2
RadioShack_Kameleon_v3b.qxd 4/10/03 3:22 PM Page 11