Radio Shack TOUCHSCREEN REMOTE - Manual (Page 6)

QUICK START GUIDE (CONTINUED)
A BOUT THE K EYPAD
1. Kameleon panel
This remote is powered by Kameleon, a unique
backlit display that combines the functionality of
a traditional remote with the power of a touch-
screen. It only displays the active keys for each
device mode.
Each mode has a main screen and menu screen.
Press MENU to access the menu screen for the
selected mode.
After 10 seconds of inactivity, the Kameleon
backlight turns off to conserve power. Pick up the
remote or press any key to turn the backlight back
on.
2. IR (infrared) Indicator
The IR Indicator animates when a signal is sent or
received.“Outgoing IR” appears on the screen
whenever a function key is pressed. When the
remote is learning,“incoming IR” appears.
3. Device keys
[
]
The TV, VCR, SAT/CBL, CD, AUD and DVD keys
select the device to be controlled. For example,
pressing the TV key allows the remote to control
the functions of your television. As an added
value, your remote features animated device
(mode) keys. After pressing a mode key, an ani-
mation appears to show the currently
activated mode.
4. P [ ]
Use P for all programming sequences. When you
hold down P for at least 3 seconds, the bottom of
the IR Indicator blinks twice, and a circle appears
around P to show that you are in programming
mode.
5. SCREEN [ ]
The SCREEN key gives you the possibility to
move through the different screens (if applicable)
within a certain mode during normal use and set
up mode.
6. POWER [ ]
The POWER key controls the same function as on
your original remote.
6 Quick Start Guide
6-
IN
-O
NE
RadioShack_Kameleon_v3b.qxd 4/10/03 3:21 PM Page 6