Radio Shack TOUCHSCREEN REMOTE - Manual (Page 13)

Quick Start Guide 13
U
SER
’
S
G
UIDE
• I F YOU CANNOT CONTROL YOUR TELEVISION PROPERLY , PLEASE CONTINUE
THE S EARCH M ETHOD AS YOU MAY BE USING THE WRONG CODE .
• D URING STEP 5, IT IS ALSO POSSIBLE TO SEND ANOTHER SIGNAL INSTEAD
OF THE POWER SIGNAL . S IMPLY PRESS ANY OF THE FOLLOWING KEYS
DURING STEP 5 INSTEAD OF THE POWER KEY : 0, 1, 2, 3, CH+,
VOL+ , PLAY OR STOP . I F , FOR EXAMPLE , DURING STEP 5 YOU PRESS
“2” INSTEAD OF “POWER”, THE REMOTE WILL SEND THE “ NUMBER 2”
SIGNAL ( MAKE SURE YOUR TV IS SWITCHED TO A CHANNEL OTHER THAN
2).
• I F NO KEY IS PRESSED WITHIN 30 SECONDS DURING STEP 5, THE REMOTE
EXITS THE SET UP MODE AND RETURNS TO THE CODE PREVIOUSLY SET UP
BEFORE STARTING THIS PROCESS .
• T O SEARCH FOR YOUR OTHER DEVICES , FOLLOW THE SAME INSTRUCTIONS
ABOVE , ONLY PRESS THE APPROPRIATE DEVICE KEY DURING STEP 2 AND
5.
• I F YOUR VCR’ S ORIGINAL REMOTE CONTROL DOES NOT HAVE A POWER
KEY , PRESS PLAY INSTEAD OF POWER DURING STEP 5.
Congratulations! You should now have your
remote set up to operate your home entertain-
ment components. For instructions on how to
operate advanced features of your remote, like
Favorite Channel Scan, Volume Lock, and Macros,
see page 27.
RadioShack_Kameleon_v3b.qxd 4/10/03 3:22 PM Page 13