Remington 490 - Manual (Page 11)

11 101274
7. NEVER use common nails or other materials as fasteners.
Remington ® Power Fasteners are manufactured from spe-
cial steel and heat treated to produce a very hard, yet
ductile, fastener.
9. ALWAYS insert the power fastener first, then the power
load. If work is interrupted for any reason, ALWAYS re-
move the power load before removing the power fastener
(see page 15, item 7).
6. Power fasteners are a permanently installed fixture. An act
of demolition is required for their removal. Appropriate
safety precautions must be taken.
Plastic Flute
Shank
Head
482-59
489-36
1 2
LOAD
REMINGTON
489-37
1 2
UNLOAD
REMINGTON
Safety Precautions
8. NEVER pry a power load out of the chamber. Prying can
discharge the load causing serious injury (see Trouble-
shooting Guide on pages 21 and 22).