Raritan Computer DOMINION DKX432 - Manual (Page 18)

8 D OMINION KX U SER G UIDE
VGA output, first issue the Stop+A command to drop to bootprom mode. Then, issue the
command:
setenv output-device screen:r1024x768x70
to change the output resolution. Issue the “boot” command to reboot the server.
You may also contact your Raritan representative to purchase a video output adapter. 13W3 Suns
with composite sync output require APSSUN II Guardian converter for use with Dominion KX.
HD15 Suns with composite sync output require the 1396C converter to convert from HD15 to
13W3 and an APSSUN II Guardian converter to support composite sync. HD15 Suns with
separate sync output require an APKMSUN Guardian converter for use with Dominion KX.
Note: Some of the standard SUN background screens may not center precisely on certain SUN
servers, that is, those with dark borders. Use another background or place a light colored icon in
the upper left hand corner.
Raritan Remote Client Key Combination Equivalents
The following keys are commands specific to the special keys on the Sun keyboard. Please use
the RRC key combinations in their place.
SUN KEY RRC
Again CTRL+ALT+F2
Props CTRL+ALT+F3
Undo CTRL+ALT+F4
Front CTRL+ALT+F5
Copy CTRL+ALT+F6
Open CTRL+ALT+F7
Paste CTRL+ALT+F8
Find CTRL+ALT+F9
Cut CTRL+ALT+F10
Help CTRL+ALT+F11
Mute CTRL+ALT+F12
Compose CTRL+ALT+Kpd
VOL+ CTRL+ALT+ +
VOL- CTRL+ALT+ -
Stop Pause/Break
Stop+A
Special
Pause/Break,A
Apple Macintosh Settings
For target servers running an Apple Macintosh operating system, no specific mouse setting is
required. However, when using Dominion KX to access and control your target server, you must
set Raritan Multi-Platform Client (MPC) to “single cursor” mode.
Note: Please see the Raritan Multi-Platform Client and Raritan Remote Client User Guide,
available on Raritan’s Website
http://www.raritan.com/support/sup_prdmanuals.aspx , or on the
Raritan User Manuals & Quick Setup Guides CD ROM included with your Dominion KX
shipment for details on installing and operating MPC and RRC.
Dual cursor mode is not supported for Macintosh target servers; the two mouse pointers will not
appear in sync if you attempt to control a Macintosh server via Dominion KX in dual cursor
mode.