Raritan Computer DOMINION DKX432 - Manual (Page 64)

54 D OMINION KX U SER G UIDE
Once outlets have been assigned, Remote Power Management to the associated server will be
available through RRC.
Note: Be sure to assign the correct outlets to each channel. If more than one outlet is physically
associated with a different server, you could accidentally switch OFF the wrong server.
Power Strip Management
To view Power Strip Properties; name, model, number of outlets, and serial number:
• Right-click on the Power Strip channel / icon in the Device Tree.
Figure 40 Power Strip Properties Window
OR
• On the View menu, click Power Strip. When the Power Strip View window of connected
Power Strips appears, select a Power Strip in the list, right-click on it, and click Properties.
− A list of the Power Strip’s outlet appears under it. Select and right-click on an outlet, then
click Properties, to view the outlet’s Properties window. In this window, you can
change the outlet’s name (as shown in the Power Strip View window), view the device
type that is plugged into that outlet (either an associated Paragon Target, or a non-
associated Appliance), and delete any previously made associations.
Figure 41 Power Strip View Window