Raritan Computer DOMINION DKX432 - Manual (Page 68)

58 D OMINION KX U SER G UIDE
Event Management
Dominion KX offers SNMP agent support through Dominion KX’s Event Management feature.
To run SNMP agent support properly, first set path, time and date permissions.
1. On the Setup menu, click Configuration, and then click Events. The Event Management
window appears.
Figure 48 Event Notification Activation Tab
2. Click on the Event Management tab to select and configure Events that you want to generate
SNMP notification events (traps).
3. Click on the checkboxes for those Event line items you wish to enable or disable. Enable or
disable entire Categories by checking or unchecking the specific Category line checkboxes.
Please see the SNMP Trap table that follows for additional information on SNMP Agents and
Traps.
4. To configure the Dominion unit as an SNMP Agent, click on the SNMP tab. Otherwise, click
OK when finished, or Cancel to exit without saving changes.
Note: No SNMP Traps are generated for the “Port Connect” and “Port Disconnect” trap when a
user connects or disconnects from the Dominion KX device from the local (OSD) port.