Radio Shack 20-501 - Manual (Page 34)

Beyond the Basics 34
Repeatedly press or until the option you
want appears, and then press E to select it.
Otherwise, press ./CLR if you do not want to
select it. Then skip to Step 7.
Press E while S-S.Alt appears. One of the
following alert options appears...
ALt bEEP: The scanner beeps when a signal
stalker signal is detected.
ALt Light: The scanner flashes the display back-
light when a signal stalker signal is detected.
ALt bP-Lt: The scanner flashes the display back-
light and beeps when a signal stalker signal is
detected.
ALt OFF: The scanner does not provide any alert
when a signal stalker signal is detected.
Repeatedly press or until the option you
want appears, then press E to select it.
Otherwise, press ./CLR if you do not want to
select it.
When you select the option, press SCAN to start
signal stalker search. Otherwise, to continue
normal scanning, repeatedly press FUNC until
disappears then press SCAN. F